Worm gear reducer mainly by turbine, worm, bearing, oil seal, input flange. Box and so on. Accessories include breather cap, oil gauge cover, output flange, cross bridge, torque arm, one-way output shaft, two-way output shaft, etc.. The main purpose is to reduce the number of turns of the motor to the required revolutions, and to increase the output torque, while changing the output direction at 90 degrees. The torque output ratio by motor outputby slowdown, take the transmission efficiency, but be careful not to exceed the rated torque reducer. The reducer reduces the inertia of the load and reduces the inertia to the square of the reduction ratio.

Features of NMRV reducer:

1 、 high quality aluminum alloy casting, light weight, high mechanical strength, no rust.

2 、 cast iron shell, red antirust primer, spray blue baking paint.

3, large output torque

4, stable transmission, small noise, suitable for long-term continuous work in harsh environment.

5, high heat dissipation, high quality heat dissipation bars.

6, beautiful and durable, small size.

7, suitable for omnibearing universal installation.

8, many specifications, from 025-150, 11 specifications for selection, modular combination, speed ratio range from 025 to 150, from 1/5 to 1/3200

Ming deceleration exclusive features:

1, aluminum alloy shell with blue spray, as beautiful as Italy products.

2, the worm adopts 20Cr steel, carburizing, quenching, fine grinding, the surface hardness of HRC60, carburized layer thickness is greater than 0.5MM

3, the turbine material adopts GB ten ring 1, much higher than tin bronze hardness, is the best turbine material.

4, the oil seal adopts imported Swedish SKF oil seal, which is not easy to leak oil. Smooth running, durable and little noise.

5 、 use synthetic lubricating oil to avoid maintenance. Applicable to all kinds of harsh environment, -30 degrees, -60 degrees

6, a variety of specifications, standing stock, a large amount of stock.

Reducer specifications are NMRV, NRV, DRV and each paragraph with E tail out of the shaft.

Model number: 025030040050063075, 090105110130150

Reduction ratio: 57.5101520253040, 506080100

Drive power range 60W-15KW

Installation method of reducer:

B3 level is installed

B8 horizontal reverse mounting

B6 side mounting

V5 install into the axle

V6 insert the shaft downwards